01962 892466

Mon - Fri: 9am - 5pm & Sat: 9am - 4pm

Trust Pilot Score
Spares Department

Dedicated

Spares Department

Icon 4

Secured

By SagePay

Home » Machinery » Blowers & Vacuums » Eliet TL450 PRO Loader with B&S Engine

Eliet TL450 PRO Loader with B&S Engine

RRP £5563.15
£5,006.00

Availability: In Stock*

Eliet
PDI: This machine will be supplied fully PDI'd as per the manufacturers specifications. See more...

Delivery: Free delivery to the UK mainland (Except Scottish Highlands and islands). See more...

Click here for product accessories

free icon

Free 1 Litre of WGM 10W40 Oil with this machine

Description

With this new TL 450 PRO, ELIET broadens its range of suction devices that can be loaded onto the trailer of a truck - the so-called Truck Loaders.   This new and powerful Truck Loader meets the requirements of customers who are looking for a budget-friendly alternative.

Features

  • SUCTION TURBINE - The suction turbine with large diameter (450 mm) guarantees considerable suction capacity. In addition, both the suction hose and the discharge pipe have a 200 mm diameter, ensuring easy pass-through of the vacuumed material and practically excluding blockage.  The cover on the suction turbine can be replaced in case of wear.  The suction turbine is lined with rubber to dampen the thumping sound made by the vacuumed material.

  • SOUND-DAMPING TURBINE WALL - Every leaf or stone that is sucked up moves with the airflow through the suction hose until it hits the impeller. Centrifugal force throws everything against the wall of the turbine where it then follows the contours of the volute housing before ending up in the discharge hose. The turbine wall, therefore, acts as a type of drum that generates a lot of noise. However, ELIET have been able to efficiently absorb the noise from each impact by fitting a suitable rubber lining around the turbine.

  • TRANSPARENT SUCTION HOSE - The ELIET Truckloader is supplied factory fitted with a transparent flexible vacuum suction hose. The highly flexible suction hose measures 3.5 metres and is transparent.  The suction mouth rests on a swivel caster, making it unnecessary to hold it up constantly. The light and transparent suction hose does not hinder the movement freedom and ensures you can immediately locate and remove obstructions in the hose. A special quick connect system makes for easy disconnection of the hose from the machine. When doing so, the associated safety device immediately switches off the engine.  Alternatively, one can opt for an “EasyhandleTM”:  a suction mouth with two swivel casters and a moveable seat, providing the operator with even greater comfort.  A support arm at 1.5 metres on the suction hose prevents it from dragging on the surface, eliminating any corresponding wear.

  • PROPELLER - The propeller is attached to the crankshaft by means of a conical drill socket, making for easy dismounting.

  • GRIPS - Two sturdy grips enable two people to lift the machine and hook it onto the truck.

  • 360° SWIVELLING DISCHARGE HOSE - The discharge hose with directional louvre has a diameter of 200 mm, just like the suction hose, which makes obstructions virtually impossible. The articulated hose made from welded wear-resistant steel components can swivel through 360°. The nylon pivot point is self-lubricating, so it never becomes blocked by dirt or rust.

  • SUPPORTS - The supports by which the machine is attached to the truck have adjustable feet with rubber soles.

  • DIRECTIONAL LOUVRE - The end of the discharge hose is equipped with a deflector flap in order to completely fill the loading space of a lorry. This flap can be adjusted to any angle. The shape of the flap ensures that the airflow does not immediately diverge when it leaves the discharge hose, thus making the airflow easier to direct.

  • EASY STORAGE - The frame sits on two wheels that provide for easy manoeuvring and easy storage.

Specification

Model TL 450 PRO

Engine 18hp B&S Vanguard ES

Material Impeller Steel Plate 3mm

Transmission Direct

Diameter Impeller 450mm

Noise Reducing Impellor Yes

Propellor 5 Blades / Muffling Effect

Chassis Tubes 25 x 25mm / Steel place 3mm / 5mm

Air Output 108m3/min

Material Propellor Steel Plate 5mm

Matieral Blow Pipe Inox

Diameter Propellor 380mm

Diameter Blow Pipe 200mm

Length Vacuum Hose 3500mm

Support Vacuum Hose Length 1400mm

Outblow pipe Rotating 360o / Diameter 200mm

Air Speed 260km/h

Capacity of fuel tank 12L

Suction Pipe Diameter 200mm

Suction Hose Vacuumflex

House Meter Yes

Dimensions 980 x 790 x 1520mm

$Field;U_Options and Accessories$
icon-1

Free Delivery

to UK Mainland

icon-2

Dedicated

Spares Department

icon-3

Established

In 1969

icon-4

Secured

By SagePay

* Subject to short term stock fluctuations