01962 601391

Mon - Fri 9am - 5pm

Trust Pilot Score

Service Dealer Awards

Home » Machinery » Tractors & Ride-Ons » Billy Goat BCR4326BVECE 43" 4WD Ride-On

Billy Goat BCR4326BVECE 43" 4WD Ride-On

RRP £10870.00
£10,109.99

Availability: Coming Soon, Please Pre-Order

Billy-Goat

Carriage: Delivery charge will be from £75.00 on this item if you are located outside of our local delivery area. The charge is calculated at the checkout depending on your location. Call or click here for more information...

Power: Petrol

Description

The Outback® 4WD Rider has been designed with a low centre of gravity in combination with a four wheel drive system that enables it to tackle those hard-to-reach places that wouldn't have been accessible to traditional machines.

The spacious platform provides sufficient space and comfort for the operator. The 110cm cutter deck with three mower spindles and cross blades is engineered to produce the best possible cut in a multitude of conditions. Its rugged fabricated construction and rear discharge setup allow for a more even and greater dispersal of clippings.

Billy Goat Outback® rider brushcutters have set the highest standard for professional brush cutting equipment on the market. The new Outback® 4WD Rider continues to expand the Billy Goat line-up. Look no further than the Billy Goat Outback® when you are looking for the ultimate brush cutting machine.

Features

Professional Engine - The 26 HP Vanguard® 810cc EFI engine features reduced fuel consumption, increased governing control and load acceptance, optimized chokeless starting and altitude compensation - all ideal for commercial turf applications.

ROPS Structure - A certified ROPS (Roll Over Protection Structure) with safety belt protects the machine and operator for rolling over and can fold 180 degrees backwards to allow for easier loading inside a van or trailer.

User-Friendly Dashboard - The operators compartment features a dashboard with control and warning lights, electric PTO engagement switch with soft start function, steering wheel with tilt-function and spinner knob, cruise control switch and a parking-brake lever.

Heavy Duty Bumpers - The wide front and rear bumpers protect the rider against accidental impacts and incorporates tie-down points for securing the machine during transportation.

Durable 110cm Mower Deck - This 110cm cutter deck is engineered to produce the best possible cut in a multitude of conditions. Its rugged fabricated construction and rear discharge setup allow for a more even and greater dispersal of clippings. The three mower spindles host cross blades that are positioned at an offset cutting height. This enhances its performance in high grass conditions with excellent material reduction, and also performs well at nicely manicured lawns.

Ergonomic Operators Platform - The large operators platform provides sufficient space for even the tallest user. Secundairy footrests provide a secure foothold expecially for use on hillsides. The contoured seat with armrests keeps you comfortable all day and is equipped with fore and aft positioning. Integrated hand rails provide a secure grip on the machine when needed.

Drive System - The Tuff Torq™ 4WD system automatically controls the output to all drive wheels. Combined with a manual locking differential, this 4WD system provides all the traction you need in challenging terrain.

Clean Air - The large Donaldson® dual stage industrial cyclonic air cleaner keeps the incoming air clean and extends the service interval by 4x when compared to a traditional panel-style air filter.

Drive Wheels - Large drive wheels with agricultural tread ensure sufficient grip. The pivoting front axle allows all four driven wheels to remain in contact with the ground for maximum traction.

Transmission Oil Cooler - A remote transmission oil cooler controls the transmission oil temperature even in the toughest conditions, reducing thermal oil breakdown for an extended operating life of the system.

Specification

Engine Vanguard

Engine Model EFI V-Twin

Performance 26hp

Displacement 810cc

Starting Electric Start

Cutting Width 43" (110cm)

Height of Cut 4,0 - 12,5cm (in transport mode max.16)

Height of Cut Adjustment 5 positions

Mower Deck Lift Mechanical

Drive Type Self Propelled

Transmission Type Variable Hydrostatic

Forward Speed 0 - 9,5km/h

Reverse Speed 0 - 6 km/h

Diff Lock Manual

Fuel Tank Capacity 16 L

Dimesions (LxWxH) 235 x 116 x 174cm

Front Tire Size 16x6.50-8

Rear Tire Size 20x10.00-8

Weight 412 kg

icon-2

Dedicated

Spares Department

icon-3

Established

In 1969

icon-4

Secured

By SagePay

* Whist we try to keep our stock availability correct it is not always possible, if in doubt please call to check prior to placing your order. 

 

** Free delivery is not applicable on all items. Smaller items, some medium items such as spas, larger ride-on machines outside of our local area and deliveries to the highlands and Islands, will have carriage applied.