Road Lights and number plate holder - The optional road equipment includes road lights, license plate holder, horn, and mirror for national homologation as a self-propelled working machine in most countries.
Operator Station - Full instrumentation and automotive-type controls are standard equipment. All controls are located within reach on the dashboard and on the right fender. Controls are designed for ease of use. The ergonomic shapes of the controls allow the driver to focus on the task at hand instead of searching for the controls during operation.
Control Panel - The operator can keep track of the machine’s status through clear instrumentation. The fuel gauge, hour meter, and coolant temperature are permanently displayed. Warnings such as engine oil pressure, air filter restriction, battery charge, and park brake light up in the display.
Twin Touch Foot Control - Twin Touch foot pedals control the speed and direction of travel: Automotive-type accelerator control for easy operation. Twin Touch design that allows operator to change direction without lifting foot off platform. Large pedal surface for increased operator comfort. When the master brake pedal is depressed, the power take-off (PTO) and cruise control disengage.
Differential Lock - A differential lock can easily be operated by pressing it with the left foot. This will ensure no slip on the traction motors
Parking Brake & Brake Pedal - The parking brake control is conveniently located below the key switch on the steering pedestal. It holds the brake pedal securely in the locked position. Depressing the brake pedal disengages the power take-off (PTO) and cruise control, allowing the engine to be started. It also applies brakes for use as a parking brake.
Hydraulic Controls - The multi-function lever is standard equipment on the X950R. It enables the operator to lift and lower the deck as well as to lift, lower, and empty the collector.
Height of cut adjustment - The height-of-cut dial provides the ability to set the mowing height from the operator's seat. It can also lock the mower in fully raised position so potential front attachments can be raised or lowered independently of the mower. It returns the mower deck to the same preset height each time it is lowered. The cut height ranges from 1 in. to 4.5 in. (25 mm to 112 mm).
Engine - For optimal performance in a commercial environment, the X950R comes with a durable and efficient 3-cylinder Yanmar® TNV Series diesel engine. This series of engine was developed to meet Interim Tier 4 (IT4) Environmental Protection Agency (EPA) environmental requirements by featuring low levels of both exhaust and emissions.
Hydrostatic Drive - The X950R is equipped with a hydrostatic transmission to drive the two individual rear wheel motors. The conveniently foot-operated traction control provides equal pressure to both wheels. If one wheel slips, pressure drops and only the other side will be powered. Oil flow is provided as needed, so that in contrast to mechanical differential locks, steering is still easy.
Frame - The full-length, welded C-channel steel frame provides plenty of strength to handle heavy equipment. It builds on the John Deere X700 Series frame with the following advantages: X950R includes additional cross brackets for maximum stiffness
Front Axle - The front axle is constructed from strong, shock-resistant nodular cast iron. Replicable bushings are used at the center axle pivot and spindles provide excellent wear resistance. Large, 1-in. (25-mm) diameter wheel spindles are used for durability: Have the strength to handle heavy front implements
Modern Styling - The open platform is roomy and uncluttered making getting on and off the tractor easy. The positioning of the driver in the tractor rather than on the tractor together with ample legroom and built-in heel pockets provides exceptional operator comfort.
Rear Deflector - As an option, both high and low dump collectors can be equipped with parking stands that stay with the collector. In conjunction with the standard quick attach system and for more versatility, the X950R can be easily modified in the field for the use without the collector where for example, open rear discharging may be preferred.
570L low dump collector - Steel frame for long life & the largest collector in the low dump category for less emptying stops.
650L high dump collector - Steel frame for long life. Largest collection hopper in the high dump category for increased uptime without the need to empty as frequently. Lift frame durability builds on John Deere experience (e.g. front loaders on current 1R Series). Emptying the collection hopper is possible at any height to suit individual application requirements. Long reach for easier emptying into the middle of trailers 80.3-in. (204-cm) high and 58.7-in. (149-cm) far out allowing full use of the trailer capacity. All hydraulic lines and cylinders are protected to avoid damage, especially when the lifted collector is next to a trailer for emptying.
Rated Power 18kW / 24.5HP @ 3400rpm
Fuel Capacity 20.4Litre
Type Hydrostatic, Twin Touch pedal
Drive System 2 Wheel Drive
Max Speed Forward 16.1km/h
Max Speed Reverse 9.7km/h
Cruise Control Standard
Differential Lock Standard, hydraulic traction assist
Brakes Internal Wet Disc
Selective Control Valves (SCVs) Single Lever 2 function SCV
Hydraulic Flow 18 L/Min
Type Stamped Steel, 2 Deep stage, Rolled Edges
PTO Engagement Electro Drive Clutch
Deck Lift/Lower Hydraulic
Cutting Height 25-112cm - 13 Positions
Deck 54" Rear Discharge (137cm)
Number of Blades 2
Low Dump Capacity 570L
High Dump Capacity 650L
Maximum Lift Height High Dump 2037mm
Reach of collector at max High Dump 1485mm
Fill Indicator Standard - Audible & Indicator on dashboard
Deflector Kit Optional - Dedicated Deflector
Collector Parking Stand Optional - Stay w/hopper
Road Homologation Kit Optional
Comfort Seat (Optional Armrests) Optional
Warranty 2 Year