01962 892466

Mon - Fri: 9am - 5.30pm, Sat: 9am - 4.30pm

Trust Pilot Score
Icon 1

Free Delivery

to UK Mainland

Spares Department

Dedicated

Spares Department

Icon 3

Established

In 1969

Icon 4

Secured

By SagePay

Home » Garden Machinery » Tractors & Ride-Ons » Grillo Outfront Ride On Mower FD450

Grillo Outfront Ride On Mower FD450

RRP is £11368.00 (Inc VAT)
Availability: In Stock*
£10486.00 (Inc VAT)

Grillo
PDI: This machine will be supplied fully PDI'd as per the manufacturers specifications. See more...

Delivery: From £75.00 inc VAT. See more...

Description

Hydrostatic mower with front-mounted cutting deck. Grass-catcher capacity is 450 Lt. Grass-catcher discharge height is 150 cm with an ejection of 57 cm; differential locking; cutting and collection high performances are its best features.
The innovative cutting system “Grillo Overblow” allows the increased acceleration of the grass/air flow into the duct increasing considerably the collection capability, even under conditions of extreme high humidity whilst at the same time keeping the noise level of the whole cutting/collecting system very low.
The front-mounted cutting deck gives the operator extraordinary visibility of the working area.
The easy light steering and the extremely small turning radius make the Grillo FD450 a mower within everybody's reach but at the same time with the necessary features for the professional user operating in tight places.

Features

FD450 The easy light steering and exceptionally small turning circle make the Grillo FD450 a mower suitable for domestic use but at the same time equipped with all the necessary features for the professional operator. The controls to adjust the cutting height, lift the cutter deck, raise and tip the grass-catcher are via an electrical push button. The FD450s cutter deck is unique. It has twin counter-rotating blades (which are not timed) plus a small front blade. It is a real out-front mower deck: 50% of its surface is free from obstacles thus ensuring perfect visibility of the working area. It allows precise cutting around bushes or under low-positioned branches and therefore reduces the time spent using hand mowers to finish off these areas. The deck also has additional front and side reinforcements. The blades drive belt is double backed (not toothed): in the event of contact with unseen objects it should not suffer damage.

 

FD450.1 The innovative cutting system produces increased acceleration of the grass/air flow. All the blades direct the grass into a large, straight load chute at the same time significantly increasing the load capacity. In this way the grass is very well-compressed improving the overall efficiency of the 450 L. grass-catcher. Under difficult conditions, when the grass is high and wet, the Grillo FD450 is extraordinarily efficient. During the autumn season, when the grass is covered with leaves, the FD450 will collect them without blocking.

 

FD450.2 The Grillo FD450 is extremely manoeuvrable and easy to drive. Control is via a steering wheel and the rear wheel steer produces an inner turning circle of just 30 cm. The hydrostatic transmission is fitted with a “damper” to enable smooth operation. In tight areas or when manoeuvring or in the presence of obstacles, the Grillo FD450 shows how agile it can be.

 

FD450.3 The floating cutting deck ensures a perfect cut even on undulating ground. The rear pivoting axle, the tyres with an anti-skid profile, allow, together with the pressure adjustment of the cutting deck on the ground, to follow with extreme precision any undulations, and therefore eliminate the possibility of scalping the grass. Forward speed ranges from 0 to 11 km/h and is continuously adjustable. Taking care of your lawn will be a pleasure not a chore. When necessary, the differential lock, operated via a pedal with automatic disengagement, allows greater traction and safety. The cutter deck's wheels are solid and puncture-proof.

 

FD450.4 The blades are automatically disengaged once the grass catcher is full. There is also the possibility to choose the “buzzer indicating” option that signals when the catcher is full. The emptying of the grass catcher is performed via electrical push-buttons, easily reached from the driver's seat; the 2 independent hydraulic rams raise the grass catcher up to a height of 150 cm with a rear overhang of 57 cm allowing easy tipping. Opening of the catcher rear door is automatic.

 

FD450.5 Engagement of the cutter blades is made via an electromagnetic clutch. The control is by a push-button. The parking brake, once engaged, allows you to dismount the machine with the engine running and the blades disengaged. In this case, the hydraulic controls for the cutter deck and grass catcher are automatically excluded.

 

FD450.6 The FD450 is fitted with a petrol 18hp B&S 7220 Professional Series twin cylinder engine with electric start and 17L fuel tank with level indicator. The engine has a 656cc displacement and incorporates the latest technical innovations ensuring reliability, low emissions, reduced consumption, high performance and vibrations levels which are reduced to the minimum. The FD450's exhaust “Grillo Super Silent” is designed by Grillo in order to obtain the highest possible noise reduction levels, emissions reduced and minimal exhaust resistance. The engine is a professional series with bearings on the crank, an oil pump, oil filter and cast iron cylinder liners.

 

FD450.7 The FD450’s design is up to the minute! The bodyworks modern clean lines as well as the attention to detail will immediately impress everyone! The operators position of the machine is ergonomically designed. The comfortable and capacious seat is equipped with adjustable suspension to adapt to the operator's weight.

 

FD450.8 Once you have finished work, cleaning the cutting deck is quick and easy! Connect a water hose to the quick coupling on the deck, let water flow and engage the blade for a few seconds...loading chute and cutter deck will be cleaned with minimal effort. The FD450's cutter deck can be easily demounted and be stably positioned vertically on its supports which are designed for this purpose; just remove the drive belt via a quick lever for easy maintenance or inspection. There is the option to remove the grass duct without any special tools. The engine and transmission components are easily accessible for inspection or servicing by lifting the grass-catcher and the seat. The Grillo FD450 is equipped with lifting hooks for easy transportation.

 

FD450.9 All components, from the simplest to the most complex, are of high quality standards. Chassis, transmission, cutter deck, are all built by Grillo in Italy using only premium materials and cutting edge technology. All this to achieve a constant 100% high level quality control. Painting of Grillo machines consists of a double electrostatic powder coated process. Grillo machines are assembled with care in every detail and tested scrupulously by specialized personnel. Final inspection means a machine whose engine has been run in order to check its performance. Grillo FD450 has been mounted with care in every detail and tested scrupulously by specialized personnel. Final inspection means a machine whose engine has been run in order to check its performance.

Specification

Model FD450

Engine Briggs & Stratton 7220 Proffessional Series V-Twin Start Electric, with 12V Battery Supply Fuel Displacement 656cc, 2 Cylinders Power 18HP (13.5kW) Air Cooled Dry air filter

Fuel Tank Capacity 17Litres

Drive Hydrostatic Transmission with differential locking

Clutch Electromagnetic PTO clutch with magnetic blade brake

Cutting Attachment Frontal cutting deck with collection. Mulching kit is an optional attachment. Solid wheels. Cutting deck with coupling for washing. 

Cutting Configuration 3 Rotating Blades

Cutting Deck Width 1190mm

Cutting Width 44" (113cm)

Cutting Height 25-90mm

Grass Collector Capacity 450Litres with full grass catcher motorised micro-switch.

Grass Collector Discharge System Grass-catcher discharge and lifting hydraulically operated. movements are activated through electric buttons. the grass-catcher opening is automatically activated. 

Maximal Discharging Height 1500mm

Rear Projection 570mm

Differential Locking Mechanical with pedal control

Front Tyres 20x10.00-8 Turf Wheels

Rear Tyres 15x6.0-6 Turf Wheels

Steering System With steeling wheel, forward and reverse gear engaged through pedal

Speed Forward 0-11km/h Reverse 0-6km/h Pedal-operated

Inner Turning Radius 30cm

Seat Dampened seat, adjustable by means of a lever

Parking Brake Disk Brake

Mowing Capacity Per Hour 8000m2/h

Accessories in Series Tow bar

Weight 400kg

Warranty  2 years

icon-1

Free Delivery

to UK Mainland

icon-2

Dedicated

Spares Department

icon-3

Established

In 1969

icon-4

Secured

By SagePay

* Subject to short term stock fluctuations