Thanks to the CL 75’s maneuverability, cutting high grass and other vegetation becomes quick and efficient. Uneven ground, steep slopes and different types of obstacles do not present a problem for the CL 75. The perfect weight distribution and the special tractor tyres give great adherence to the ground under all conditions. The cutter deck has a single blade with swinging tips, producing a very good finish even when mowing grass, making it an ideal machine for grass care both for the professional or domestic user.
Cutter Deck - The deck of the CL 75 is mounted at the front therefore allowing the operator to cut under low positioned branches or bushes. High grass, coppices and bushes are guided into the cutter deck and cut by the blade with (shock-resistant) swinging tips which are made from special steel, the cut material is then discharged out of the rear. If necessary the cutter deck’s front aperture will lift up automatically when entering high vegetation without crushing it down, which considerably increases the efficiency of the machine. The deck is made of steel, the cutting height can be adjusted from a minimum of 50mm up to a maximum 150 mm. The adjustment is progressive and can easily be regulated by means of a hand wheel. The cutter deck is kept parallel to the ground in all positions. The cutter deck's blade tips are produced with a special profile to reduce noise and produce an excellent quality cut even on English lawns!. The 150 mm maximum cutting height is ideal especially when the ground is very uneven and also to avoid striking the soil. The deck’s front wheel is made of solid rubber, i.e. puncture-proof.
Weight Distribution - CL 75 has a perfect weight distribution and a low centre of gravity. The result is perfect balance. It is possible to use the handlebar with one hand whilst working; this allows the adjustment of the drive and engagement of the reverse gear by a simple lever.
Handlebar - The handlebar of the CL 75 has a double adjustment device, ie. height adjustment, in order to meet the operators’ requirements, and lateral adjustment to make cutting easier in difficult areas such as under low positioned branches or in the presence of obstacles. Also under extreme conditions such as a very steep slope or uneven ground, mowing is easy thanks to the 4 ply wheels mounted on ball bearings and equipped with differential lock.
Hydrostatic - The CL 75’s transmission is hydrostatic with differential lock. It is possible to adjust the speed progressively by means of a lever on the handlebar from 0 to 6 km/h and in reverse gear up to 3,5 km/h. The CL 75 has parking brake enabling you to keep the machine stable even on slopes. All controls are in a comfortable position including the handlebar adjusting levers.
Engine - The CL 75 is powered by a Honda GXV340 OHV petrol engine with integrated fuel tank having 2,1ltrs capacity. The single cylinder engine has a displacement of 337cc and features all the latest innovations, giving great reliability, low emissions, reduced consumption, high performance and vibration reduced to the minimum, The engine’s manual recoil start is easy and reliable thanks to the particular design of the camshaft, which, during start-up, opens the exhaust valve slightly. The engine is equipped with a lubrication pump allowing the machine to work on slopes without damaging the engine itself.
Maintenance Position - The CL 75 can be easily be stood in a vertical position by simply placing the handlebar on the ground. Maintenance and cleaning of the cutter deck is then easily achieved. Belt tension of the cutter deck is self-adjusting; there is also a parallelogram lift system, that regulates the cutter deck’s height, and this system gives the belt and bearings reliability and longevity. All components, from the simplest to the most complex, are of a high quality standard. Chassis, handlebar, cutter deck, are all manufactured by Grillo using only premium materials and cutting edge technology. All this to achieve a constant and 100% controlled high level quality.
Model Grillo CL75 Grass Cutter
Engine Honda GXV340 OHV, Start recoil starter, Supply fuel, Displacement 337 cc, 1 Cylinder, Power 8.9 HP (6.6 kW), Air cooled, Dry air filter with interchangeable filter cartridges
Fuel Tank Capacity 2.1 Ltrs
Cutter Deck Rear discharge with front tipping opening
Cutting configuration 1 rotating blade with 2 shockproof floating blades
Cutting width 30" (76cm)
Cutting Height From 50 to 150 continuously and rapidly adjustable by means of a crank lever
Peripheral blade speed 74 m/s
Differential locking Manual engaged differential lock
Drive wheels Tractor wheels with 4 ply tyres 4.00-8
Front wheel 8x3.00-4 puncture-proof wheel
Speed Continuously variable from 0 to 6 km/h, reverse gear from 0 to 3,5 km/h
Parking brake By lever
Handlebar By means of a rapid height and lateral adjustment of the handlebar
Mowing capacity per hour (indicative) 2500 m2/h
Dimensions LxWxH 2150mm x 845mm x 1050mm
Briggs & Stratton Fuel Fit:
Treats 10L of fresh fuel. For more info click here...
For the correct grade engine oil click here...