Snapper ZTX275 48" (122cm) Zero-Turn

Snapper ZTX275 48" (122cm) Zero-Turn Description

The Snapper ZTX 275 stands out as being uniquely different in the zero-turn sector. Built to the same commercially inspired standards as its Snapper siblings a fully welded steel frame, thick-walled front axle and easy access points make this 48"/122cm machine built to last.

With a rear discharge cutting deck, equal and closer cuts are able to be made whichever way around an obstacle is approached. The unwanted spreading of grass onto footpaths and flower beds is further prevented. Snappers CentreCut™ deck is manufactured from 12 gauge fabricated steel and is both tough and long-lasting. Due to the half-height baffle kit and eliminator blades, a superior finish is given.

Practicality is further enhanced thanks to the rear-mounted cargo bed providing convenience and versatility whilst working in the garden. Engine access is uncompromised, thanks to its flip-up design.

Power is provided by a Briggs & Stratton Professional Series™ 8270 V-Twin OHV engine. A premium unit, fuel efficiency, low vibration and smooth running are characteristics of this engine thanks to its V-Twin cylinder design. A full lubrication system and spin-on oil filter enhance maximum engine life.

Superb manoeuvrability is controlled by the adjustable soft touch levers, whilst a comfortable driving environment is enhanced by the premium mid-back seat with built-in armrests.

The heavy-duty rear-discharge cutting deck enables the operator to cut quickly and efficiently. The foot-operated mower deck lift and uncomplicated single pin design allow 13 heights of cut to be made, ranging from 38mm-110mm. Electric engagement of the triple-bladed cutting deck is easily made by the ergonomically placed, panel-mounted control. Deck wheels provide additional support and help reduced scalping, whilst the addition of a wash port makes underside cleaning simple.

A full-height mulching kit is available as an option.

The Centrecut Convertible Rear Discharge Deck:

The CENTRECUT™ Convertible Rear Discharge Deck takes cutting performance to a whole new level. The deck configuration can be altered to suit any grass conditions. This heavy-duty, fabricated, steel mower deck comes fitted as standard with Eliminator blades giving the best in mulching performance. What’s more, in all cutting modes, this rear discharge deck with 4 gauge wheels enables trimming on either side, preventing grass clippings from being blown on to pavements or flower beds.

REAR DISCHARGE - At the start of the season, you may just want to discharge the grass to the rear, without mulching, so use the deck without any baffles.

HALF-HEIGHT MULCHING BAFFLE - Mid-Season - and for ongoing cuts - you can use the half-height mulching baffle (supplied fitted to the deck).

FULL HEIGHT MULCHING BAFFLE - If you are looking for the superior mulching finish, you can fit the full height mulching baffle (optional extra).

Snapper ZTX275 48" (122cm) Zero-Turn Specification

Model Number ZTX275

Engine Make Briggs and Stratton

Engine Model Intek™ Series 8270 V-Twin

Engine Starting System Electric Key Start

Transmission Hydrostatic

Cutting Width 122cm (48")

Steering Twin Lever Steering C/W Comfort Grips

Cutting Method Centre Cut Rear Discharge

Mulching Yes (Optional)

Warranty 3 Years Domestic

Snapper ZTX275 48" (122cm) Zero-Turn Arrange a Consultation

Please fill in your details below and we will contact you as soon as possible to discuss this machine. Please note, due to the size of this machine, we can only deliver it within a certain radius of our branches, so we will discuss this with you.

Full Name:*

Email Address:*

Best Contact Number:*

Preferred method of contact:*

Your location:*

Please tell us whereabouts you are based so we can get the relevant branch in touch with you. We have branches based in Winchester(SO22), Liss(GU33) and Sunningdale(GU20). We can only sell this item within a certain radius of our branches.

Enter not this field:

*Indicates a field you must enter.

When you have completed the form, please click the Send Details button ONCE to send

Snapper ZTX275 48" (122cm) Zero-Turn Delivery Information

All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.

We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.

GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £150 delivery charge

For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.