Ariens IKON XD 52 (132cm) 52" Zero-Turn with Ariens Engine
RRP is £6,400.00 (Inc VAT)
Saving of £320.00
Ariens IKON XD 52 (132cm) 52" Zero-Turn with Ariens Engine Features
Commercial-Style Deck - An 11.4cm (4½") deep fabricated and welded deck provides durability and maximum airflow in challenging conditions to create a precise cut.
Full Tubular Frame - The fully tubular steel frame rails are strong and more resistant to stresses, to support loads of the machine with unprecedented strength and stability.
Dial-Operated Cut Height - Choose from 13 cutting positions, from 3.8-11.4cm (1½-4½”), in 6mm increments with just the turn of a dial.
4-Point Hanging Deck - Commercial-style deck suspension creates a more level cut when going over uneven terrain.
Ariens IKON XD 52 (132cm) 52" Zero-Turn with Ariens Engine Specification
Model Number 915343
Engine Ariens Twin Cylinder
Displacement 764cc
Drive System Hydro-Gear® EZT Transaxles
Fuel Capacity 10.5 litres
Ground Speed (Approximate) 7mph Fwd / 3mph Rev
Deck Material 11ga
Deck Construction Fabricated
Number of Spindles 3
Blade Tip Speed 17,000 fpm
Spindle & Shaft Material Steel
Deck Drive Belt
Deck Engagement Electric Warner®
Deck Lift System Foot Operated
Cutting Width 52" (132cm)
Cutting Heights 1.5" - 4.5" (3.8cm - 11.4cm)
Cutting Positions 13
Wheels (Front) 11 x 4" - 5"
Wheels (Rear) 20" x 10 - 8"
Seat High Back w/ Armrests
Hour Meter Standard
Warranty (Machine) 3 Year Limited Consumer
Weight 291.8kg
Ariens IKON XD 52 (132cm) 52" Zero-Turn with Ariens Engine Arrange a Consultation
Commercial-Style Deck - An 11.4cm (4½") deep fabricated and welded deck provides durability and maximum airflow in challenging conditions to create a precise cut.
Full Tubular Frame - The fully tubular steel frame rails are strong and more resistant to stresses, to support loads of the machine with unprecedented strength and stability.
Dial-Operated Cut Height - Choose from 13 cutting positions, from 3.8-11.4cm (1½-4½”), in 6mm increments with just the turn of a dial.
4-Point Hanging Deck - Commercial-style deck suspension creates a more level cut when going over uneven terrain.
Model Number 915343
Engine Ariens Twin Cylinder
Displacement 764cc
Drive System Hydro-Gear® EZT Transaxles
Fuel Capacity 10.5 litres
Ground Speed (Approximate) 7mph Fwd / 3mph Rev
Deck Material 11ga
Deck Construction Fabricated
Number of Spindles 3
Blade Tip Speed 17,000 fpm
Spindle & Shaft Material Steel
Deck Drive Belt
Deck Engagement Electric Warner®
Deck Lift System Foot Operated
Cutting Width 52" (132cm)
Cutting Heights 1.5" - 4.5" (3.8cm - 11.4cm)
Cutting Positions 13
Wheels (Front) 11 x 4" - 5"
Wheels (Rear) 20" x 10 - 8"
Seat High Back w/ Armrests
Hour Meter Standard
Warranty (Machine) 3 Year Limited Consumer
Weight 291.8kg