John Deere X940 54" (137cm) Tractor

RRP is £22,726.80 (Inc VAT)

£19,050.00 (Inc VAT)

Spring Savings Of £3,676.80

Price: £19,050.00 (Inc VAT)
Stock: Out Of Stock

John Deere X940 54" (137cm) Tractor Features

Reliable, High Torque Engine – Yanmar 18kW (24.5kW) at 3,400rpm. The 3-cylinder diesel engine offers high torque to power all attachments. Efficient combustion reduces exhaust emissions and increases fuel economy. The redesigned bonnet improves air management for lower operating temperatures.

Mowing Deck - Side Discharge 54” (137 cm) commercial grade deck is stamped from a single steel plate, then rust-proofed in a special dual process. The shaft drive is built to last, and the wet PTO clutch is virtually maintenance-free. The rear discharge deck is ideal for up-close trimming on both sides, and converts from mulching to rear discharge in under 30 seconds. The side discharge deck is perfect in long grass.

Mulching - Optional MulchControl provides the ability to change between mulching and side discharge.

Hydrostatic Transmission and Hydraulic Power Steering – The X940 Series models are easy to operate and manoeuvre thanks to the Twin Touch pedals and standard power steering. Twin Touch Foot Pedals, 2-wheel drive & 2-front wheel steer

Frame - A full length, fully welded steel frame provides maximum strength. The uilt-in front bumper accepts front weights and the nodular cast iron front axle maximises durability.

Easy to Use Hydraulics - Ergonomic levers hydraulically raise and lower the mower deck and attachments. A “float” position enables front-mounted equipment to follow ground contours. The intuitive controls enable easy operation.

John Deere X940 54" (137cm) Tractor Specification

Model X940

Engine
Type Diesel
Manufacturer Yanmar
Nominal Power 24.5hp (18kW)
Cylinders 3
Displacement 903cm3
Fuel Tank Capacity 19.7L

Transmission 
Type Hydrostatic
Drive System Twin Touch Foot Pedals, 2-wheel Drive
Max Forward Speed 8.5mph (13.7km/h)
Max Reverse Speed 6mph (9.7km/h)
Cruise Control Standard
Differential Lock Standard
Brakes Internal Wet Disc

Hydraulics
Selective Control Valves 2 Dual SCVs
Hydraulic Flow 21.6L/min

Power Steering
Type 2 Front Wheel Steer
Turning Radius 25" (63.5cm)

Mower Deck
Type Stamped Steel
PTO Engagement Electro-Hydraulic
Deck Life/Lower Hydraulic
Cutting Height 1-5.25" (25-133mm)
Cutting Width 54" (137cm)
Number of Blades 3

Seat
Type Standard
Optional Comfort

Safety Reverse implement Option (RIO)

John Deere X940 54" (137cm) Tractor Arrange a Consultation

Please fill in your details below and we will contact you as soon as possible to discuss this machine. Please note, due to the size of this machine, we can only deliver it within a certain radius of our branches, so we will discuss this with you. 

Please tell us whereabouts you are based so we can get the relevant branch in touch with you. We have branches based in Winchester(SO22), Liss(GU33) and Sunningdale(GU20). We can only sell this item within a certain radius of our branches.

John Deere X940 54" (137cm) Tractor Delivery Information

All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.

We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.

  • GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
  • AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £200 delivery charge

For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.

Reliable, High Torque Engine – Yanmar 18kW (24.5kW) at 3,400rpm. The 3-cylinder diesel engine offers high torque to power all attachments. Efficient combustion reduces exhaust emissions and increases fuel economy. The redesigned bonnet improves air management for lower operating temperatures.

Mowing Deck - Side Discharge 54” (137 cm) commercial grade deck is stamped from a single steel plate, then rust-proofed in a special dual process. The shaft drive is built to last, and the wet PTO clutch is virtually maintenance-free. The rear discharge deck is ideal for up-close trimming on both sides, and converts from mulching to rear discharge in under 30 seconds. The side discharge deck is perfect in long grass.

Mulching - Optional MulchControl provides the ability to change between mulching and side discharge.

Hydrostatic Transmission and Hydraulic Power Steering – The X940 Series models are easy to operate and manoeuvre thanks to the Twin Touch pedals and standard power steering. Twin Touch Foot Pedals, 2-wheel drive & 2-front wheel steer

Frame - A full length, fully welded steel frame provides maximum strength. The uilt-in front bumper accepts front weights and the nodular cast iron front axle maximises durability.

Easy to Use Hydraulics - Ergonomic levers hydraulically raise and lower the mower deck and attachments. A “float” position enables front-mounted equipment to follow ground contours. The intuitive controls enable easy operation.

Model X940

Engine
Type Diesel
Manufacturer Yanmar
Nominal Power 24.5hp (18kW)
Cylinders 3
Displacement 903cm3
Fuel Tank Capacity 19.7L

Transmission 
Type Hydrostatic
Drive System Twin Touch Foot Pedals, 2-wheel Drive
Max Forward Speed 8.5mph (13.7km/h)
Max Reverse Speed 6mph (9.7km/h)
Cruise Control Standard
Differential Lock Standard
Brakes Internal Wet Disc

Hydraulics
Selective Control Valves 2 Dual SCVs
Hydraulic Flow 21.6L/min

Power Steering
Type 2 Front Wheel Steer
Turning Radius 25" (63.5cm)

Mower Deck
Type Stamped Steel
PTO Engagement Electro-Hydraulic
Deck Life/Lower Hydraulic
Cutting Height 1-5.25" (25-133mm)
Cutting Width 54" (137cm)
Number of Blades 3

Seat
Type Standard
Optional Comfort

Safety Reverse implement Option (RIO)

John Deere X940 54" (137cm) Tractor Delivery Information

All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.

We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.

  • GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
  • AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £200 delivery charge

For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.