John Deere X949 54" (137cm) Tractor
RRP is £26,234.40 (Inc VAT)
Saving of £3,618.40
John Deere X949 54" (137cm) Tractor Features
Reliable, High Torque Engine – Yanmar 18kW (24.5kW) at 3,400rpm. The 3-cylinder diesel engine offers high torque to power all attachments. Efficient combustion reduces exhaust emissions and increases fuel economy. The redesigned bonnet improves air management for lower operating temperatures.
Mowing Deck - Side Discharge 54” (137 cm) commercial grade deck is stamped from a single steel plate, then rust-proofed in a special dual process. The shaft drive is built to last, and the wet PTO clutch is virtually maintenance-free. The rear discharge deck is ideal for up-close trimming on both sides, and converts from mulching to rear discharge in under 30 seconds. The side discharge deck is perfect in long grass.
Mulching - Optional MulchControl provides the ability to change between mulching and side discharge.
Hydrostatic Transmission and Hydraulic Power Steering - Twin Touch Foot Pedals, 4-wheel drive & 4-front wheel steer
Frame - A full length, fully welded steel frame provides maximum strength. The uilt-in front bumper accepts front weights and the nodular cast iron front axle maximises durability.
Easy to Use Hydraulics - Ergonomic levers hydraulically raise and lower the mower deck and attachments. A “float” position enables front-mounted equipment to follow ground contours. The intuitive controls enable easy operation.
John Deere X949 54" (137cm) Tractor Specification
Model X949
Engine
Type Diesel
Manufacturer Yanmar
Nominal Power 24.5hp (18kW)
Cylinders 3
Displacement 903cm3
Fuel Tank Capacity 19.7L
Transmission
Type Hydrostatic
Drive System Twin Touch Foot Pedals, 4-wheel Drive
Max Forward Speed 8.5mph (13.7km/h)
Max Reverse Speed 6mph (9.7km/h)
Cruise Control Standard
Differential Lock Standard
Brakes Internal Wet Disc
Hydraulics
Selective Control Valves 2 Dual SCVs
Hydraulic Flow 21.6L/min
Power Steering
Type 4 Front Wheel Steer
Turning Radius 21" (53cm)
Mower Deck
Type Stamped Steel
PTO Engagement Electro-Hydraulic
Deck Life/Lower Hydraulic
Cutting Height 1-5.25" (25-133mm)
Cutting Width 54" (137cm)
Number of Blades 3
Seat
Type Standard
Optional Comfort
Safety Reverse Implement Option (RIO)
John Deere X949 54" (137cm) Tractor Arrange a Consultation
John Deere X949 54" (137cm) Tractor Delivery Information
Delivery Information
All tractors, riders and Wood Chippers are delivered personally by one of our experienced team. You can order online if you are in one of the following postcodes, and we will get in touch with you to arrange the delivery date.
For more information on large deliveries, including if you are outside of the below areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.
- SO; GU; PO; SP; RG - Free Of Charge
- CF; NP; CB; EX; TA; DT; BA; BS; SN; BH; BN; RH; TN; ME; CT; SS; CM; CO; SG; AL; LU; HP; SL; ST; TF; WV; WS; DY; HR; WR; B; GL; CV; LE; OX; NN; MK; PE; WD; EN; UB; HA; NW; N; E; IG; RM; W; WC; EC; TW; SW; SE; DA; BR; CR; SM; KT - £150 delivery charge
Reliable, High Torque Engine – Yanmar 18kW (24.5kW) at 3,400rpm. The 3-cylinder diesel engine offers high torque to power all attachments. Efficient combustion reduces exhaust emissions and increases fuel economy. The redesigned bonnet improves air management for lower operating temperatures.
Mowing Deck - Side Discharge 54” (137 cm) commercial grade deck is stamped from a single steel plate, then rust-proofed in a special dual process. The shaft drive is built to last, and the wet PTO clutch is virtually maintenance-free. The rear discharge deck is ideal for up-close trimming on both sides, and converts from mulching to rear discharge in under 30 seconds. The side discharge deck is perfect in long grass.
Mulching - Optional MulchControl provides the ability to change between mulching and side discharge.
Hydrostatic Transmission and Hydraulic Power Steering - Twin Touch Foot Pedals, 4-wheel drive & 4-front wheel steer
Frame - A full length, fully welded steel frame provides maximum strength. The uilt-in front bumper accepts front weights and the nodular cast iron front axle maximises durability.
Easy to Use Hydraulics - Ergonomic levers hydraulically raise and lower the mower deck and attachments. A “float” position enables front-mounted equipment to follow ground contours. The intuitive controls enable easy operation.
Model X949
Engine
Type Diesel
Manufacturer Yanmar
Nominal Power 24.5hp (18kW)
Cylinders 3
Displacement 903cm3
Fuel Tank Capacity 19.7L
Transmission
Type Hydrostatic
Drive System Twin Touch Foot Pedals, 4-wheel Drive
Max Forward Speed 8.5mph (13.7km/h)
Max Reverse Speed 6mph (9.7km/h)
Cruise Control Standard
Differential Lock Standard
Brakes Internal Wet Disc
Hydraulics
Selective Control Valves 2 Dual SCVs
Hydraulic Flow 21.6L/min
Power Steering
Type 4 Front Wheel Steer
Turning Radius 21" (53cm)
Mower Deck
Type Stamped Steel
PTO Engagement Electro-Hydraulic
Deck Life/Lower Hydraulic
Cutting Height 1-5.25" (25-133mm)
Cutting Width 54" (137cm)
Number of Blades 3
Seat
Type Standard
Optional Comfort
Safety Reverse Implement Option (RIO)
Shop with confidence online. MowWithUs.com is a family-run business, part of Winchester Garden Machinery LTD. We one of the largest garden machinery retailers in the UK for Honda, Hayter, Stihl, Husqvarna, EGO, John Deere, Countax, Mountfield, Stiga and more. For over five decades, we have served organisations, enterprises, and loyal clients both in-store and online. Our four showrooms are located in the south, but when you shop online or by phone, you will receive the same high level of service from our 50+ knowledgeable employees as you would in our showrooms.
Quick Delivery
Most things are dispatched with the expectation of being delivered within 2-3 days. Next day delivery is available; please check shipping options throughout the checkout process.
Authorised Distributors
All of the equipment we sell is authorised by the manufacturers, including Honda, Stihl, Husqvarna, Hayter, Toro, and Countax.
Price Guarantee
The vast majority of our online products have discounts applied, so we are always competitive on pricing. Please contact us if you believe we are not competitive enough.
Aftersales
As a leading retailer, we provide expert advice on the machinery we sell, as well as servicing and spare parts.
Quality Assurance
Our friendly and experienced staff are accessible by phone or email to provide expert advise on the best machines to meet your needs and ensure that you get the finest quality at the greatest price.