Billy Goat BCR4328BVECE 43" (110cm) Outback Rider

Billy Goat BCR4328BVECE 43" (110cm) Outback Rider Description

The Outback® 4WD Rider has been designed with a low centre of gravity in combination with a four wheel drive system that enables it to tackle those hard-to-reach places that wouldn't have been accessible to traditional machines.

The spacious platform provides sufficient space and comfort for the operator. The 110cm cutter deck with three mower spindles and cross blades is engineered to produce the best possible cut in a multitude of conditions. Its rugged fabricated construction and rear discharge setup allow for a more even and greater dispersal of clippings.

Billy Goat Outback® rider brushcutters have set the highest standard for professional brush cutting equipment on the market. The new Outback® 4WD Rider continues to expand the Billy Goat line-up. Look no further than the Billy Goat Outback® when you are looking for the ultimate brush cutting machine.

Billy Goat BCR4328BVECE 43" (110cm) Outback Rider Features

Professional Engine - The 28 HP Vanguard® 810cc EFI engine features reduced fuel consumption, increased governing control and load acceptance, optimized chokeless starting and altitude compensation - all ideal for commercial turf applications.

User-Friendly Dashboard - The operators compartment features a dashboard with control and warning lights, electric PTO engagement switch with soft start function, steering wheel with tilt-function and spinner knob, cruise control switch and a parking-brake lever.

Drive System - The Tuff Torq™ 4WD system automatically controls the output to all drive wheels. Combined with a manual locking differential, this 4WD system provides all the traction you need in challenging terrain.

Drive Wheels - Large drive wheels with agricultural tread ensure sufficient grip. The pivoting front axle allows all four driven wheels to remain in contact with the ground for maximum traction.

Transmission Oil Cooler - A remote transmission oil cooler controls the transmission oil temperature even in the toughest conditions, reducing thermal oil breakdown for an extended operating life of the system.

Durable 110cm Mower Deck - This 110cm cutter deck is engineered to produce the best possible cut in a multitude of conditions. Its rugged fabricated construction and rear discharge setup allow for a more even and greater dispersal of clippings. The three mower spindles host cross blades that are positioned at an offset cutting height. This enhances its performance in high grass conditions with excellent material reduction, and also performs well at nicely manicured lawns.

Heavy Duty Bumpers - The wide front and rear bumpers protect the rider against accidental impacts and incorporates tie-down points for securing the machine during transportation.

Billy Goat BCR4328BVECE 43" (110cm) Outback Rider Specification

Engine EFI V-Twin

Displacement 810cc

Drive System Self Propelled

Fuel Capacity 16 litres

Mower Deck Lift Mechanical

Cutting Width 43" (110cm)

Cutting Heights 4.0 - 12.5 (in transport mode max.16)

Wheels (Front) 16x6.50-8

Wheels (Rear) 20x10.00-8

Weight 412 kg

Length 235 mm

Width 116 mm

Height 174 mm

Type Differential Manual

Billy Goat BCR4328BVECE 43" (110cm) Outback Rider Arrange a Consultation

Please fill in your details below and we will contact you as soon as possible to discuss this machine. Please note, due to the size of this machine, we can only deliver it within a certain radius of our branches, so we will discuss this with you.

Full Name:*

Email Address:*

Best Contact Number:*

Preferred method of contact:*

Your location:*

Please tell us whereabouts you are based so we can get the relevant branch in touch with you. We have branches based in Winchester(SO22), Liss(GU33) and Sunningdale(GU20). We can only sell this item within a certain radius of our branches.

Enter not this field:

*Indicates a field you must enter.

When you have completed the form, please click the Send Details button ONCE to send

Billy Goat BCR4328BVECE 43" (110cm) Outback Rider Delivery Information

All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.

We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.

GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £150 delivery charge

For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.