The lightest brushcutter of the new generation. Modern appearance, convenient operation and very simple starting procedure are the highlights of the new generation STIHL grass trimmer range. The number of steps needed to start the machine has been drastically reduced. The frustration of a flooded engine is virtually eliminated. New 2-stroke engine with stratified charge allows fast acceleration, low emissions, reduced fuel consumption. With bent shaft, loop handle and AutoCut mowing head ideally for trimming small areas of grass and around obstacles.
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual fuel pump (Purger) - A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Multi-function control handle - Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Simplified starting system - Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Power Output 0.7kW / 1.0hp
Sound Pressure Level 94dB(A)
Sound Power Level 107dB(A)
Vibration Level (L/R) 7.0/6.4m/s2
Total Length without cutting tool 145cm
Standard Cutting Tool AutoCut mowing head C 5-2
Tank Volume 0.34L
Drive Shaft in Shaft Flexible
STIHL ErgoStart (E) Retrofittable
Multi-Function Handle Yes
Loop Handle / Bike Handle Loop
Harness/Carrying System Retrofittable
Stihl Engine (Mix) 2-MIX
Warranty 2 Years
AutoCut C mowing head (2-line) - Double lines, for mowing and thinning work. Mowing lines are automatically extended when the mowing head is tapped on the ground. With comfort grip for easy re-loading.
DuroCut mowing head - Double or quadruple lines, for mowing and thinning work. Up to four lines can be easily inserted. Compatible with many different sizes and types of mowing line.
PolyCut mowing head - Universal cutting tool for trimming and working on large areas. With three moving plastic knives.
Basic harness - Basic harness for FS, HL, HT.
Protective cover for brushcutters - Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.