Grillo Climber 8.22 is a hydrostatic single-blade brush-cutter featuring innovative components resulting in excellent performance. It has a professional hydrostatic axle with integrated differential lock, an electromagnetic clutch, light and smooth steering, a cutter deck with internal baffles to evenly distribute the cut grass, a wider cutting height range to make transfers and driving over kerbs and bumps easier, bigger wheels 3.50-6. Impressive performance on slopes and when cutting shrubs and high grass. Widely used in agriculture and ideal in vineyards, olive groves and underneath foliage. 50 cm steering radius. Transfer speed ranges from 0 up 10 km/h. The rear wheels 18×9.50-8 are comfortable and totally safe on slopes.
Climber 8.22 has a B&S 7220 Professional Series 18 HP (22 HP Gross Power) engine with 7 ltr fuel tank. The cast-iron twin-cylinder, OHV, 656 cc petrol engine combines innovative and modern solutions to ensure reliability, reduced emissions, vibrations and consumption to give exceptional performance. The air filter can easily be accessed for quick cleaning. The Climber 8.22 “Grillo Super Silent” stainless steel silencer has been specially designed to drastically reduce noise emissions. Climber 8.22 is a compact brush-cutter, with a low center of gravity and perfect weight distribution. It has been designed to ensure maximum stability, greater safety and comfort for the operator. The brake pedal which acts on the front wheels allows perfect safety when driving downhill and is fitted with anti-grass protection along with puncture-proof front wheels.
A baffle to distribute the cut grass is supplied with the machine and is stored on the cutter deck housing. It can be fixed under the cutter deck to ensure even spreading of the grass, especially on English style lawns. The 91 cm cutter deck is very robust and fitted with reinforced baffles. The blade is engaged via an electric switch located near to the steering wheel. The cutting height, ranging from 3,5 to 11 cm, can be selected from the operator’s seat by means of a lever which also has a transfer position which is used to raise the cutter deck from the ground. In this position, the blade is automatically disengaged to easily negotiate kerbs and other obstacles. The cutter decks belt is self-adjusting. Blades are made of a special steel and fitted with double-cutting profile swinging tips; once one side of the tip is worn out, it can be turned upside down. Such blades are of a special shape to reduce both power absorption and noise emissions.
Engine Briggs & Stratton 7220 Professional Series V-Twin, Start electric, with 12 V battery, Supply fuel, Displacement 656 cc, 2 Cylinders, Power 18 HP (13.2 kW), Air cooled, Dry air filter
Fuel Tank Capacity 7Litres
Gear Box Hydrostatic Transmission
Clutch Electromagnetic with PTO and blade brake
Cutter Deck Rear/side discharge
Cutting configuration 1 rotating blade
Cutting width 36" (91cm)
Cutting height From 35 mm to 110 mm with 6 different cutting positions and one travel position.
Differential locking With pedal engagement
Front tyres 3.50-6 TRACTOR and puncture-proof treated
Rear tyres 18x9.50-8 TRACTOR
Speed Continuously variable from 0 to 10 km/h, reverse gear from 0 to 6 km/h
Inner turning radius 50cm
Seat Sprung and adjustable, equipped with roll-bar.
Service Brake on the front wheels with pedal engagement.
Parking Brake On the rear wheels with level engagement.
Mowing capacity per hour (indicative) 7000 sq. m/h