This very robust single-blade hydrostatic brush-cutter is equipped with a differential lock and front safety brakes and is ideal to cut high grass and woody type shrubs on slopes and uneven ground. Climber 9 can climb slopes in maximum safety and is very efficient in maintaining overgrown, neglected areas, agricultural areas as well as lawns and is highly recommended for intensive use. Its extreme maneuverability, smooth, light steering and fast working speed allows this machine to work efficiently whilst remaining simple and easy to operate. Climber 9 is a compact brush-cutter with a low center of gravity and perfect weight distribution, designed to ensure maximum stability and greater safety for the operator under most working conditions even on slopes.
The Climber 9.18 is equipped with a 15.2 HP (18 HP Gross Power) B&S Prof. Series Intek 7180 petrol engine with suspension seat and “low” roll-bar. Both engines have twin cast-iron cylinders, OHV, 656 cc and both ensure low emissions, reduced consumption and vibrations and high performance. The front axle and tractor tires allow both firm grip and traction on irregular and low-adherence ground. Climber 9 tackles steep slopes safely and easily!
The extremely tight steering radius of 38 cm allows the machine to move in narrow confined areas. Given its compact size Climber S9 works perfectly underneath foliage. Climber 9 has drum brakes on the front wheels which are operated via a pedal to ensure safety on steep slopes and on slippery ground. The brakes, combined with the differential lock, give maximum ground adherence. The 91cm single-blade cutter deck is very robust and remarkably resistant to impacts with stones. The large diameter blade shaft and the cutting transmission guarantee reliability even under the most demanding conditions and for many hours in total safety. The cutting height ranges from 3 cm to 9 cm. The blade is made of special steel and has a low noise profile, the swing tips of the blade are retractable in case of impact and can be turned around when one side is worn out. The cutter deck has two side protection baffles that can be raised to make maintenance and cleaning easier.
Model Climber 9.18
Engine Briggs & Stratton 7180 Intek
Start electric, with 12 V battery
Displacement 656 cc, 2 Cylinders
Power 15.2 HP (11.3 kW) - Gross power 18 HP
Dry air filter
Fuel Tank Capacity 13 L (emergency supply 3 L)
Gear Box Hydrostatic transmission with reduction gear and differential.
Clutch Electromagntic with PTO and Blade brake
Cutting Attachment Rear discharge
Cutting Configuration 1 rotating blade
Cutting Width 36" (91cm)
Cutting Height 30-90mm at 4 positions
Differential Locking By pedal-action
Front Tyres Tractor 13x5.00-6 Wheels
Rear Tyres Tractor 17x8.00-8 Wheels
Speed Variable Speed - Forward - 0-9km/h - Reverse - 0-6km/h
Seat Equipped with springs, adjustable, with armrests and roll bar
Service Brake On front wheels brakes are pedal-operated
Parking Brake On rear wheels brakes are lever-operated
Mowing Capacity Per Hour 7200m2/h
Warranty 2 Years